Tracer Application in Study of Reaction Kinetics using Duolite ARA-9366B and Duolite A-638
DOI:
https://doi.org/10.37591/jomcct.v5i1.1984Keywords:
Radiotracer isotopes, 131I, 82Br, non-destructive technique, ion-isotopic exchange reactions, radio analytical technique, anion exchange resins, nuclear grade resin, Duolite ARA-9366B, Duolite A-638Abstract
Radiotracer isotopes 131I and 82Br were used to study the iodide and bromide ion-isotopic exchange reactions taking place in two anion exchange resins Duolite ARA-9366B (nuclear grade) and Duolite A-638 (non-nuclear grade) under different operational parameters like temperature and ionic concentration of exchanging medium. The results of present investigation indicate an existence of strong positive linear co-relationship between amount of ions exchanged and concentration of ionic solution; while existence of strong negative co-relationship between amounts of ions exchanged and temperature of exchanging medium. It was observed that during iodide ion-isotopic exchange reaction under identical experimental conditions of 40.0 °C, 1.000 g of ion exchange resins and 0.003 M labeled iodide ion solution, the values of specific reaction rate (min−1), amount of iodide ion exchanged (mmol), initial rate of iodide ion exchange (mmol/min) and log Kd were 0.185, 0.417, 0.077 and 10.2 respectively for Duolite ARA-9366B resin, which was higher than 0.118, 0.338, 0.040 and 6.4 respectively for Duolite A-638 resins. It was observed that using Duolite ARA-9366B resins, at a constant temperature of 40.0 °C, as the concentration of labeled iodide ion solution increases from 0.001–0.004 M, the percentage of iodide ions exchanged increases from 51.70–57.5%. While using Duolite A-638 resins under identical experimental conditions, the percentage of iodide ions exchanged increases from 43.20–45.80%. The identical trend was observed for the two resins during bromide ion-isotopic exchange reaction. The overall results indicate superior performance of Duolite ARA-9366B resins over Duolite A-638 resins under identical operational parameters.
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |