Synthesis, Characterization and Drug delivery Application of Poly (Safranine) based triblock copolymer

Authors

  • murugesan yasabie abatneh Kombolcha Institute of Technology, Wollo University
  • A. Fasil Department of Chemical Engineering, Kombolcha Institute of Technology, Wollo University, Kombolcha, Ethiopia, Africa
  • S. Gandhi Department of Polymer Technology, Kamaraj College of Engineering and Technology, Virudhunagar, Tamil Nadu, India
  • R. Anbarasan Department of Polymer Technology, Kamaraj College of Engineering and Technology, Virudhunagar, Tamil Nadu, India

DOI:

https://doi.org/10.37591/jomcct.v9i2.1245

Keywords:

Synthesis, Ring opening polymerization, Characterization, Molecular weight, Drug release study

Abstract

Synthesis, characterization and humidity sensor application of poly(safranin) (PSaf) was carried out under inert atmosphere. The monomer to initiator ratio [M0/I0] was maintained accurately at 100. In order to improve the molecular weight and processability it was block copolymerized with bio-compatible and bio-degradable ε-caprolactone (CL) and water-soluble tetrahydrofuran (THF) separately. Thus, the derived triblock copolymer was subjected to humidity sensor application and the results are viewed in broad approach and thus critically compared. The triblock were characterized by Fourier transform infrared (FTIR) spectroscopy, Cyclic voltammetry, GPC analysis, FESEM analysis, conductivity and drug release study. The results achieved here in the present investigation were critically compared with the literature values.

Author Biography

  • murugesan yasabie abatneh, Kombolcha Institute of Technology, Wollo University

    Associate  professor,Department of Chemical Engineering,

    Kombolcha Institute of Technology, Wollo University, Ethiopia.

References

Adhikari,B., & Majumdar,S. (2004). Polymers in sensor applications. Progress in Polymer Science, 29, 699-766.

Saxena,V., &Malhotra, B.D.(2003).Prospects of conducting polymers in molecular electronics. Current Applied Physics. 3, 293- 305.

Fleischmann,C., Lievenbrück, M.,& Ritter, H. (2015).Polymer films in sensor application:a review of present uses and future possibilities. Polymers, 7, 717-746.

Anbarasan, R., Sudha, M.,& Gopalan, A. (1999). Synthesis and characterization of nano sized NiO and its surface catalytic effect on Poly(vinyl alcohol). Polymer News,24,391-396.

Tan,L., Xie,Q., & Yao,S. (2004).Electrochel.and spectroelectrochel.studies on pyridonine

hydrochloride using poly(methylene blue) modified electrode. Electroanalysis,16,592- 597.

Liu,L.J., Cai,S.J., Tan,Y., Du,J.J., Dong,H.L., &Liao,L.Q. (2009). A recoverable, metal

free catalyst for the green polymerization of ε.CL. J. Polym. Sci.Part A: Polyer

Chemistry,47, 214-222.

Zhong,Z., Ankone,M.J.K.,Dijksfra,J., Birg,J.,& Feijen,P.J.C.(2007). Calcium methoxide

Initiated ring opening polymerization of caprolactone and lactide. Polymer Bulletin,46,

- 557.

Lin,I.H.,Cheng,C.C.,Yen,Y.C.,&Chong,F.C. (2010). Synthesis and characterization of

poly(o-anisidine)/V2O5andpoly(o-anthranilicacid)/V2O5nanocomposites.Macromolecules,

, 245-252.

Chen,H.H.,Anbarasan,R.,Quo,L.S.,&Chen,P.H. (2011). Synthesis and characterization of

novel acid functional fluorescent poly(caprolactone). Journal of Material Science. 46,

-805.

Li,J.,Xie,Cheng,W.,Nickol,H.N.R.G.,&Wang,P.G. (1999). Poly(caprolactone) modified

hydroxyl cellulose films prepared by lipase catalyzed ring opening polymerization,

Macromolecules.Macromolecules, 32, 789-794.

Zhong,X.,Ji,C.,Chan,A.,Kazarian,K.L.,Rutys,S.G.,&Dehghani, A.(2011). Conducting

polymer nano tubes for controlled drug Release. Journal Material Science Materials

medicine, 22, 279-288.

Javakhishvili,I.,Binder,W.H.,Tanner,S.,&Hvilsted,S. (2010).Facile synthesis of linear

dendritic cholesteryl poly(caprolactone)-block-(l-lysine) G2 by thiolene and azide-alkyne

click reactions.1,506-514.

Chen,H.H.,Anbarasan,R.,Quo,L.S.,&Chen,P.H. (2011). A novel report on Eosin Y

function MWCNT as an initiator for ring opening of ε-caprolactone. Material Chemistry

and Physics 126, 584-590.

Meenarathi,B.,Chen,H.H.,Chen,P.H.,&Anbarasan,R. (2013).NIR dye functionalised

MWCNT as an effective initiator for the ring opening polymerization of ε-caprolactone

.Journal of Polymer Research. 20, 118-130.

Sobczak,M.,&Kolodziejski,W. (2009). Polymerization of cyclic esters initiated by

carnitine and Tin(II) octoate, Molecules, 14, 621-632.

Liow,S.S.,Nidjaja,L.K.,Lippk,V.T.,&Abad,M.(2009).Process optimization of

poly(caprolactone) synthesized by ring opening polymerization. Experiment polymer

Letters,3,159-167.

Kerman, I.,Toppare,L.,Yilmaz,F.,&Yogci,Y. (2005).Thiophene end capped ε-caprolactone

conducting copolymers and their electrochromic properties. Journal of Macromolecular

Science Part A: Pure Applied Chemistry 42, 509-520.

Wilson,B.C.,&Jones,C.W. (2004).A recoverable, metal free catalyst for the green

polymerization of ε.CL. Macromolecules,37, 709-714.

Aourishi,A.,Deyab,S.S.A.,&Shakri,H.H.(2010).The Cationic Ring opening polymerization

of THF with 12-Tungstophosphoric acid. Chin, Journal of Polymer Science, 28, 305-

Aourishi,A.,Deyab,S.S.A.,&Shakri,H.H. (2010). Cationic Ring opening polymerization

of THF with Keggin type hetero-poly compounds as solid acid catalyst. Molecules,15,

-407.

Shokrollahi, P.(2010). Supramolecular poly(tetrahydrofuran) based on a pyrimidinone

associating motif. Iranian Polymer Journal, 19, 765-774.

Ferrahi,M.I.,&Belbachir,M. (2003). Polycondensation of THF with phthalic anhydride

induced by a proton exchanged MMT clay. International Journal of Moecular Science,

, 312-325.

Akbulnt,O.,Tasighchi,I.,Kubor,S.,Horn,Y.S.,&Mayer,A.M. (2007). Synthesis and

characterization of nano sized Zn(OH)2 and Zn(OH)2/PVA nano composite.

Electrochimica Acta.,52, 1983-1989.

Liu, S., Wu,Y., Zhang,Y.,Chi,Z.,Wei,Y., &Xu,J. (2009). Synthesis and characterization

of aniline trimer. Chemistry Letters, 38085, 840-841.

Murugesan,A.,Meenarathi,B.,Kannammal,L.,&Anbarasan,R.(2014).Synthesis,

characterization and drug delivery activity of poly(anthranilicacid) based triblock

copolymer. Synthetic Metals,189,143-151.

Anbarasan,R.,Vasudevan,&T.,Gopalan, A.(1999). Conductivity hysteresis in polymer electrolytes incorporating PTHF. Polymer News,24,391-395.

Radhika,S.,Duraimurugan,K.,Baskaran,I.,&Anbarasan,R. (2009). Metal oxide assisted chemical synthesis of poly(α-naphthylamine) and characterizations. Journal of Material Science,44,542- 555.

Balster,A.E.,Komarov,U.M.,Basanov,A.G.,Zubritskaya,N.,G.,&Machaluba, N.N., (2010). Effect of the basic process parameters during polymerization of THF with perchloric acid. Fiber Chemistry, 42, 215- 219

Chen,H.H.,Kuo,L.S.,Anbarasan.R.,&Chen,P.H. (2011). A novel report on Eosin Y function MWCNT as an initiator for ring opening of ε-caprolactone. Material Chemistry and Physics, 126, 584-590.

Agathian,K., Siva, P., Meenarathi,B., Kannammal,L.,& Anbarasan,R.(2013). Luminol initiated ring opening polymerization of Caprolactone. Indian Journal of Science, 5, 237-240.

Agathian,K., &Anbarasan,R. (2013). Synthesis and Characterizations of Novel Poly(safranine-co-luminol). Discovery Science, 6, 209-213.

Downloads

Published

2018-10-22

Issue

Vol. 9 No. 2 (2018)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.